Inicio>Noticias > Noticias de la Industria

Mold making, pattern making

Mold making, Pattern making

lamp_housing_aluminum_thermoset_plastic_compression_mold.jpg

In the casting process, a pattern is made in the shape of the desired part. Simple designs can be made in a single piece or solid pattern. More complex designs are made in two parts, called split patterns. A split pattern has a top or upper section, called a cope, and a bottom or lower section called a drag. Both solid and split patterns can have cores inserted to complete the final part shape. Cores are used to create hollow areas in the mold that would otherwise be impossible to achieve. Where the cope and drag separates is called the parting line.

When making a pattern it is best to taper the edges so that the pattern can be removed without breaking the mold. This is called draft. The opposite of draft is an undercut where there is part of the pattern under the mold material, making it impossible to remove the pattern without damaging the mold.

The pattern is made out of wax, wood, plastic, or metal. The molds are constructed by several different processes dependent upon the type of foundry, metal to be poured, quantity of parts to be produced, size of the casting, and complexity of the casting. These mold processes include:

Sand casting — Green or resin bonded sand mold.
Lost-foam casting — Polystyrene pattern with a mixture of ceramic and sand mold.
Investment casting — Wax or similar sacrificial pattern with a ceramic mold.
Ceramic mold casting — Plaster mold.
V-process casting — Vacuum with thermoformed plastic to form sand molds. No moisture, clay or resin required.
Die casting — Metal mold.

Por favor, siéntase libre de dar su consulta en el siguiente formulario. Le contestaremos en 24 horas.

WeChat/Teléfono :	+86-18841534576
Envíe por fax :
Buzón :	annamaaning@163.com



Mensaje